While cruising out on the ocean or hometown lake, there’s nothing better than enjoying your favorite album or artist playing in your boat. A marine sub-woofer can enhance your sound experience ten-fold, including amplifying the bass tones in whatever music you put into listening.
Relieving the bass duty will result in better sound from your speakers. Instead of pumping out the lows, mediums, and highs, your other marine speakers can deliver the crisper, clearer high and mid-range sound while your subwoofer takes care of the deep lows.
An angler has an added treat when they install a subwoofer. Subwoofers amplify the bass of their music, and they will be able to attract fish to them because fish can be attracted to low-frequency sounds.
Below is a guide to help you choose the best marine subwoofer for you and your boat.
Related: Best DACs under 100 Dollars
Here are some of the specifications that you need to investigate if you are interested in buying a subwoofer. They will assist you in making the right choice before you invest in an ideal product:
The power of a subwoofer product will be of particular importance in placing a speaker in a boat. It needs to be powerful enough to be able to cut through the open air so that you can enjoy the music.
The watt power should be measured with two different numbers as you will see a lower amount and a higher figure. RMS, which means the root mean square of the speaker, will be represented by the lower number.
The measurement is the best value of the waveform, which is essential for the recommended power rating. The peak power rating will be the other figure, and it will always be the higher figure between the two.
It shows how loud it will be before the device can no longer handle it. There will be a higher amount of power needed because of more space in a larger boat which the sound would need to carry.
You need to know more about the power rating to get the most out of your subwoofer. When on a boat, a stereo unit and amplifier will be able to cope with an increase in sound volume.
Marine-grade materials conform to a higher standard than any other type of subwoofer. It has to be water-resistant to deal with the inevitable splashes. Non-resistant water subwoofers will cause huge problems, and it applies equally to speakers, battery, and stereo.
Their build should be of high quality. Salty air can also start to corrode any exposed metal, so you should put it into consideration.
The UV lights can damage a subwoofer that is direct to the sunlight. It is vital to guard against these potential dangers, and the best marine subwoofers handle these types of hazards.
It is a measure of electrical resistance and the related amount of power that your speaker will accept from your amplifier. A speaker with less impedance extracts more energy from an amp than one with a high one. The amplifier impedance level should match that of a subwoofer so as to avoid overheating of amplifier or damage of the output tube and transmitter.
Make sure the subwoofer fits in with your existing marine speakers. You have three options during installation; you either plugin or play the model that can easily be connected, you can do the wiring yourself, or hire a professional.
The most challenging part expected is mounting the subwoofer to match your marine stereo in the boat. Get a professional if you can’t do the installation.
Below are the best marine subwoofers that we will explore in different aspects surrounding them when you decide to create your dream marine audio setup.
- SWR-M100 – Alpine 10″ Single 4-Ohm Type-R Marine Subwoofer
- Bazooka MBT1014 10-Inch 4-Ohm Marine Subwoofer
- Rockford Fosgate P1S4-10 Punch P1 SVC 4 Ohm 10-Inch Peak Subwoofer
Why You Should Buy a Marine Subwoofer
Marine subwoofers provide you with a deep, productive sub-bass response for high-quality sound without taxing your speakers. Subwoofer designs are for free-air use or infinite baffle.
It means you can simply mount it in the hull of your boat without having to worry about an air volume, enclosure, and all the other aspects that usually involve subwoofers.
Best Marine Subwoofers Work Reviews
Rockford Fosgate P1S4-10 Punch P1 SVC 4 Ohm 10-Inch Peak Subwoofer
Punch components will give you impressive sound that will stand out in a crowd. Rockford Fosgate showcases their passionate commitment to sonic excellence in the Punch Series of subwoofers, speakers, and amplifiers.
The P1S4-10 dishes out the kind of powerful low end you crave due to its design. It has a responsive paper cone reinforced with the same Kevlar fibers used in bulletproof vests so that you get the warm bass that is exceptionally hard-hitting.
A new technique is used by Rockford Fosgate to attach the oversized rubber to surround the cone that increases availability cone to up to 25 percent. The subwoofer can push more air for even bigger bass.
The subwoofer works equally well in a sealed or ported enclosure, so you can choose the kind of bass you would want. It also features an extended pole piece and a bumped backplate that leaves room for the massive excursion; hence it will hit deeper lows without booming out.
- Kelvar reinforced paper cone
- Power range of 50-250 watts
- Hybrid Stamp Cast basket
- The frequency response of 30-250 Hz
- Powerful superior sound
- Deep bass
- Quality design and materials
- Lacks subwoofer grille insert
Bazooka MBT1014 10-Inch 4-Ohm Marine Subwoofer
The BT Series marine Bass Tubes are UV-and moisture-resistant, making the Bazooka bass enjoyable when playing on the water. Bazooka products are known for being built with space-saving enclosures that deliver powerful bass.
They have a patented tube design that ensures accurate and efficient output, so you don’t need a bigger amplifier to get a big sound. Bazooka MBT1014 Bass Tube features a 10-inch waterproof woofer with surround foam treated to promote smooth woofer excursion.
- 4-ohm impedance
- The sensitivity of 140 dB
- 100 watts RMS
- UV-resistant enclosure
- Clear bass sound
- Fairly priced
- Great design and construction
- Powerful sound
SWR-M100 – Alpine 10″ Single 4-Ohm Type-R Marine Subwoofer
The SWR-M100 provides reliable performance by having a molded polypropylene cone with a Santoprene rubber surround that offers, and you can feed it up to 300 watts RMS from your marine amplifier. It delivers a classic Alpine punch for resonant bass that you can hear and feel. The airflow and CRC motor keep running it cool, even in the summer heat.
Alpine engineered the SWR-M100 subwoofer to stand up to heat and humidity so that you enjoy the bass in each season. It is not necessary to enclose the subwoofer because it works well in free-air applications. The high excursion design gives you high performance regardless of its placement.
- 300 watts RMS
- Waterproof mounting gasket
- Polypropylene frame
- 4-ohm impedance
- Deeper bass
- Apparent sound
- Durable grill
- Great look
Buying the best marine subwoofer should not be as challenging as many people claim to be. By following the above information, you will certainly land the best marine subwoofer.